Update Coolpad Note 3 from Lollipop to Marshmallow and get VoLTE

Welcome to My First Blog !

Follow my steps to securely Update Coolpad Note 3 [Lollipop to Marshmallow] with 100% working method :

[official stock rom V022] 

[VoLTE supported]

Hii guys welcome to my blog ,
I will show you how to update your coolpad note 3 to 
latest marshmallow android (6.0) its very easy guys..

let me tell u guys about the things u need :-


1.official stock rom file (SP_Flash_8676_I02_6.0_V022)

Update : [Download the file Directly from here] : https://drive.google.com/file/d/0BxTmJdoktzgnZFFzUUQtV3gxMHM/view?usp=drivesdk

*****for your help the link is given below*****
but you can't download it directly 

at first you have to log in to coolpadforums.com and reply to the post...
you can do that by going to the underneath website ...

log in ,comment &download it from here




2. the 2nd tool u need is SP Flash tool (latest) for ur computer
****for your convenience the download link is given below****

download sp flash tool latest from here



3. the third thing is nothing but you need a data cable ..ha ha 

4. sp drivers so that your pc detects  your coolpad note 3
(may not be needed in every case ..specially for win10pro users )

Before u go to flash ur phone.. follow the steps

1.if ur phone is rooted then please back up ur imei 
2.if ur needed is not rooted then no need to root it
3.SP Flash tool will do every work ..you need not to worry
4.please back up ur personal data(sms,contancts) .. this does not a rooted phone he he
5.make sure that ur phone has sufficient charge ...
6.if u can please remove your sim cards , and sd card at the time of flashing (not at all necessary)
7. that's all...

Now lets jump to procedure .....

1.first of all extract all the files which u have downloaded 

2.install the sp drivers if you need it 

3.now open the sp flash tool folder and locate the flash_tool.exe



4. then the window will open and please press the download button ...



5. see that the scatter loading file is blank 
*****for your information MT6753 is ur processor in cpn3*****

6.now press that scatter loading button and locate to the folder where you have extracted the  "SP_Flash_8676_I02_6.0_V022" file.

7.it will automatically locate the scatter file as a scatter file is in the .txt format ,and in
folder there will be only one .txt file like that ,so u will need not to do hardwork to locate
that file .


8. now  it will load all the files {for your information the scatter file contains all the
information that is needed to be downloaded on your mobile }

9.now put ur usb cable inside your pc/laptop

10.turn off your phone  and connect to the pc via usb cable

11. the windows will make some sound as when something is inserted
***if your phone goes to power charging mode , then u have to once again repeat the
whole process or u will have to install sp drivers properly***

12.now a red band will apear like below in the flash tool



13.after this the flash  tool will show a pink band which means it has started formatting your disk...



14.now u can observe that on the left side ext has been created and dram has been configured it means u are going in a right way

15.next step is when it starts downloading the stock firmware 



16.when the flash completes its downloading to 100% it will show  a "download ok" pop up.




17. it means it has successfully flashed your device .

18. now just remove and unplug ur mobile from pc .

19. now turn it on by pressing thr power key , it will take a long time to have a first boot .

20.CONGO you have flashed marshmallow rom in your mobile successfully.

i will give a review regarding the new mm update shortly
stay connected ......

For any queries related to this you can contact me to this no. +917797886491

please share this blog......